LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 493 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Wheel Cylinder >> Installation

Wheel Cylinder: Installation

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wheel cylinder.
  2. Install the bolts. Tighten the bolts to specification. See TORQUE SPECIFICATIONS .
  3. Connect the brake pipe to the wheel cylinder. Tighten the brake pipe fitting to specification. See TORQUE SPECIFICATIONS .
  4. Install the brake shoes. See DRUM BRAKE SHOE .
  5. Bleed the brake system. See HYDRAULIC BRAKE SYSTEM - MANUAL  or HYDRAULIC BRAKE SYSTEM - PRESSURE  under BLEEDING.
scientia non olet · About LEMON Manuals