LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 493 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Warning Lamp Switch >> Removal

Park Brake Warning Lamp Switch: Removal

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the knee bolster trim panel.
  2. Remove the electrical connector.
  3. Remove the park brake warning lamp switch mounting bolt.
  4. Remove the park brake warning lamp switch from the vehicle.