LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 493 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Pedal Assembly >> Removal

Park Brake Pedal Assembly: Removal

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the park brake, if applied.
  2. Raise and support the vehicle.
  3. Loosen the park brake cable. See PARK BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
  4. Remove the park brake release handle.
  5. Press the retaining tabs in on the front park brake cable.
  6. Remove the front park brake cable from the park brake pedal.
  7. Remove the park brake pedal mounting bolts.
  8. Remove the park brake pedal assembly.
scientia non olet · About LEMON Manuals