LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 493 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Cable Equalizer >> Removal

Park Brake Cable Equalizer: Removal

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the park brake, if applied.
  2. Raise and support the vehicle.
  3. Remove the right rear park brake cable from the equalizer.
  4. Remove the spring from the equalizer, if equipped.
  5. Remove the park brake from the connector. See Figure.
  6. Using the Park Brake Cable Release Tool, collapse the locking tabs on the park brake cable. See Figure.
  7. Remove the park brake cable from the equalizer.
scientia non olet · About LEMON Manuals