LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 493 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Cable Equalizer >> Installation

Park Brake Cable Equalizer: Installation

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the park brake cable in the equalizer.
  2. Install the park brake cable in the connector.
  3. Install the right rear park brake cable in the equalizer.
  4. Install the equalizer spring.
  5. Adjust the park brake. See PARK BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
  6. Lower the vehicle.
Fig 1: Identifying Park Brake Connector
G00305466Courtesy of GENERAL MOTORS CORP.
Fig 2: Disconnecting Park Brake Cable At Equalizer
G00305467Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals