Park Brake Cable - Rear 4WD Pickups And Utilities: Installation
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the park brake cable frame retainers.
- Install the park brake cable in the rear axle housing retainers, if removed.
- Install the park brake cable in the brake caliper bracket.
- Install the park brake cable on the park brake actuator.
- Install the park brake cable on the equalizer.
- Install the park brake cable in the connector.
- Adjust the park brake. See PARK BRAKE ADJUSTMENT under ADJUSTMENTS & INSPECTION.
- Lower the vehicle.