Park Brake Cable - Front: Removal
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Release the park brake, if applied.
- Remove the left trim panel knee bolster.
- Raise and support the vehicle.
- Loosen the park brake cable at the equalizer.
- Remove the front park brake cable from the connector.
- Remove the retainer and the grommet.
- Remove the front brake cable from the park brake pedal.
- Remove the front park brake cable.