Activating Air Bag System
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Mazda Tribute, 2004 Mazda RX-8, 2004 Mazda MX-5 Miata, 2004 Mazda MPV, and 2004 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure negative battery cable is disconnected. WAIT at least ONE MINUTE. If equipped with side air bags, remove air bag simulator from driver's side air bag harness. Connect driver's side air bag harness to vehicle harness. Remove air bag simulator from driver's side safety belt buckle connector. Connect driver's side safety belt buckle connector to vehicle harness. Remove air bag simulator from passenger's side air bag harness. Connect passenger's side air bag harness to vehicle harness. Remove air bag simulator from passenger's side safety belt buckle connector. Connect passenger's side safety belt buckle connector to vehicle harness.
- Remove passenger's air bag simulator from vehicle harness. Connect passenger's air bag module connector to vehicle harness. Install glove box. Remove air bag simulator from vehicle harness at top of steering column. Connect driver's air bag module to vehicle harness. Install access cover.
- Connect negative battery cable. See SYSTEM OPERATION CHECK .