LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Wheel Cylinders >> Removal

Wheel Cylinders: Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Remove rear wheels. Clean all dirt and foreign material from wheel cylinder brake pipe fitting and bleeder valve.
  2. Remove brake drum and brake pipe nut. Install a cap over the end of brake pipe to prevent brake fluid loss and/or brake fluid contamination.
  3. Remove wheel cylinder bolts. Spread brake shoes apart. Remove wheel cylinder. Clean old sealant from backing plate where wheel cylinder was installed. Clean sealant from wheel cylinder if reusing wheel cylinder.
scientia non olet · About LEMON Manuals