LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove brake fluid from reservoir. Discard fluid into an approved container.
  2. Disconnect electrical connector from brake fluid level sensor.
  3. Remove brake fluid level sensor.
  4. Remove master cylinder reservoir attachment pins and discard the pins.
  5. Release reservoir from master cylinder by carefully pulling reservoir straight up.
  6. Remove reservoir seals from master cylinder body.
scientia non olet · About LEMON Manuals