Master Cylinder: Installation
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate reservoir seals and bayonets with brake fluid.
- Install reservoir seals to master cylinder body.
- Install reservoir to master cylinder body by pushing reservoir bayonets straight down into the seals in master cylinder body.
- Install NEW reservoir attachment pins. Ensure that attachment pins are fully and firmly seated.
- Install brake fluid level sensor.
- Connect low brake fluid level sensor electrical connector.
- Fill master cylinder reservoir. Bleed hydraulic brake system. See BLEEDING BRAKE SYSTEM .