Braking Action Uneven - Front To Rear

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

The number below refers to the step number on the diagnostic table:

Suspension components that are not operating properly may cause a disturbance to the vehicle during application of the brake system.

Were you sent here from DIAGNOSTIC STARTING POINT - HYDRAULIC BRAKES? If so, go to next step. If not, go to DIAGNOSTIC STARTING POINT - HYDRAULIC BRAKES under TROUBLE SHOOTING.
Inspect the suspension system for proper operation. Did you find and correct a condition? If so, go to step 6 . If not, go to next step.
Inspect the hydraulic brake system for proper operation. See HYDRAULIC BRAKE SYSTEM TESTING under SYSTEM TESTING. Did you find and correct a condition? If so, go to step 6 . If not, go to next step.
Inspect the disc brake system for proper operation. See DISC BRAKE SYSTEM TESTING under SYSTEM TESTING. Did you find and correct a condition? If so, go to step 6 . If not, go to next step.
Inspect the brake assist system for proper operation. See BRAKE ASSIST SYSTEM TESTING under SYSTEM TESTING. Did you find and correct a condition? If so, go to step 6 . If not, go to DIAGNOSTIC STARTING POINT - HYDRAULIC BRAKES under TROUBLE SHOOTING.
Road test the vehicle in order to confirm proper operation. Is the condition still present? If so, go to step 2 . If not, system is okay.