LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Disc Brakes) >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect electrical connector from brake fluid level sensor. Disconnect brake pipes from master cylinder. Plug brake pipes to prevent fluid loss and contamination.
  2. Remove master cylinder mounting nuts. Remove master cylinder.
scientia non olet · About LEMON Manuals