LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Common Specs & Procedures) >> Brakes >> Disc Brakes >> Disc Brakes Service Specifications

Disc Brakes Service Specifications

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKES SERVICE SPECIFICATIONS

Application In. (mm)
Front Brakes
Rotor Discard Thickness (1) 1.08 (27.5)
Rotor Thickness (New) 1.14 (29)
Rotor Maximum Allowable Lateral Runout 0.002 (0.051)
Rotor Maximum Allowable Scoring 0.059 (1.50)
Rotor Maximum Allowable Thickness (Variation) 0.001 (0.025)
Rear Brakes
Rotor Discard Thickness (1) 0.728 (18.50)
Rotor Thickness (New) 0.787 (20)
Rotor Maximum Allowable Lateral Runout 0.002 (0.051)
Rotor Maximum Allowable Scoring 0.059 (1.50)
Rotor Maximum Allowable Thickness (Variation) 0.001 (0.025)
(1) All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.