LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Engine Mechanical - 6.6L V8 Diesel) >> Removal & Installation >> Water Pump >> Removal

Water Pump: Removal

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove left front fender wheelhouse inner panel. Drain engine coolant and engine block. See DRAINING & REFILLING COOLING SYSTEM . Remove thermostat housing crossover. See THERMOSTAT HOUSING COVER . Remove fan clutch. See FAN BLADE ASSEMBLY . Remove crankshaft balancer. See CRANKSHAFT BALANCER .
  2. Remove water pump outlet pipe to water pump nuts. Remove engine wiring harness retainer from inner stud. Remove water pump bolts. Note location of bolts. The bolts are 3 different lengths. Remove water pump assembly. Remove water pump outlet pipe gasket.