LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Engine Mechanical - 6.6L V8 Diesel) >> Removal & Installation >> Fan Blade Assembly >> Installation

Fan Blade Assembly: Installation

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.

Install fan clutch onto fan blade. See Fig 1. Install fan clutch bolts. Install fan assembly. Install Fan Clutch Wrench (J-41240-5A) to fan clutch. Install upper fan shroud.

Fig 1: Removing & Installing Fan Blade Assembly
G00081897Courtesy of GENERAL MOTORS CORP.