LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Rear Suspension System) >> Removal & Installation >> Stabilizer Shaft Link >> Removal

Stabilizer Shaft Link: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle and support by the frame allowing the control arms to hang free.
  2. Remove the stabilizer link bolts. See Figure.
  3. Remove the stabilizer link.