Disc Brake Service Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE SERVICE SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Front Brakes | ||
| Rotor Discard Thickness | 1.19 (30.3) | |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.002 (0.06) | |
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |
| Rotor Maximum Allowable Thickness (Variation) | 0.001 (0.025) | |
| Rotor Minimum Allowable Thickness (After Refinish) | 1.205 (30.6) | |
| Rotor Thickness (NEW) | 1.26 (32) | |
| Rear Brakes | ||
| Rotor Discard Thickness | 0.965 (24.5) | |
| Rotor Maximum Allowable Assembled Lateral Runout | 0.002 (0.06) | |
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |
| Rotor Maximum Allowable Thickness (Variation) | 0.001 (0.025) | |
| Rotor Minimum Allowable Thickness (After Refinish) | 0.980 (24.9) | |
| Rotor Thickness (NEW) | 1.02 (26) | |