Disc Brake Service Specifications
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE SERVICE SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Front Brake Pads | ||
| Minimum Lining Thickness | 0.039 (1) | |
| New Lining Thickness | 0.433 (11) | |
| Front Brake Rotors | ||
| Discard Thickness | 0.906 (23) | |
| Maximum Assembled Lateral Runout | 0.002 (0.05) | |
| Maximum Groove Depth | 0.059 (1.5) | |
| Maximum Thickness (Variation) | 0.001 (0.025) | |
| Minimum Thickness (After Refinishing) | 0.906 (23) | |
| NEW Thickness | 0.984 (25) | |
| Rear Brake Pads | ||
| Minimum Lining Thickness | 0.039 (1) | |
| New Lining Thickness | 0.394 (10) | |
| Rear Brake Rotors | ||
| Discard Thickness | 0.295 (7.5) | |
| Maximum Assembled Lateral Runout | 0.006 (0.15) | |
| Maximum Groove Depth | 0.059 (1.5) | |
| Maximum Thickness (Variation) | 0.001 (0.025) | |
| Minimum Thickness (After Refinishing) | 0.295 (7.5) | |
| NEW Thickness | 0.354 (9) | |