Disc Brake Service Specifications
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE SERVICE SPECIFICATIONS
| Application | In. (mm) | |||
|---|---|---|---|---|
| Front Brakes | ||||
| Rotor Discard Thickness (1) | 1.21 (30.7) | |||
| Rotor Maximum Allowable Assembled Lateral Runout | 0.002 (0.06) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.5) | |||
| Rotor Maximum Allowable Thickness (Variation) | 0.001 (0.025) | |||
| Rotor Minimum Allowable Thickness (After Refinish) | 1.25 (31.7) | |||
| Rotor Thickness (NEW) | 1.27 (32.2) | |||
| Rear Brakes | ||||
| Rotor Discard Thickness (1) | 0.35 (9) | |||
| Rotor Maximum Allowable Assembled Lateral Runout | 0.002 (0.06) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.5) | |||
| Rotor Maximum Allowable Thickness (Variation) | 0.001 (0.025) | |||
| Rotor Minimum Allowable Thickness (After Refinish) | 0.42 (10.6) | |||
| Rotor Thickness (NEW) | 0.43 (11) | |||
|
||||