Removal & Installation (Manual Transmission)
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Remove shift handle. Remove cup holder.
- Remove screws from center console trim plate. Remove trim plate. Open storage compartment cover. Remove storage compartment. Remove nuts from rear of center console.
- Disconnect electrical connectors. Remove center console. To install, reverse removal procedure. Tighten screws and nuts to specification. See TORQUE SPECIFICATIONS .