LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 461 (Supplemental Inflatable Restraint System) >> Diagnostic Tests >> DTC B0053: Deployment Commanded With Loop Malfunction >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. If SIR diagnostic system check has been performed, go to next step. If SIR diagnostic system check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK .
  2. Turn ignition off. If air bags have deployed, go to step  5. If air bags have not deployed, go to next step.
  3. Inspect front of vehicle and undercarriage for signs of impact. If impact has occurred, go to step  5. If no impact has occurred, go to next step.
  4. Replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM)  under REMOVAL & INSTALLATION. Go to step  6.
  5. Replace components and perform inspections as required following an accident. See POST-COLLISION INSPECTION .
  6. Reconnect all SIR components. Ensure that all components are properly mounted. Go to SIR DIAGNOSTIC SYSTEM CHECK .
scientia non olet · About LEMON Manuals