Removal & Installation (Side Impact)
WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See ZONE 7 under DISABLING & ACTIVATING AIR BAG SYSTEM.
- Remove applicable seat back cover See Fig 1. Make note of bag module wire harness routing for use during assembly. Remove side impact air bag module nuts. Remove wire harness from cable clips. Remove side impact air bag module assembly.
- To install, reverse removal procedure. Ensure side impact air bag wire harness is positioned correctly. Tighten side impact air bag module nuts to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ZONE 7 under DISABLING & ACTIVATING AIR BAG SYSTEM.