Removal & Installation (Passenger-side)

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See ZONE 5 under DISABLING & ACTIVATING AIR BAG SYSTEM.
Remove instrument panel trim pad. See INSTRUMENT PANEL TRIM PAD . Remove passenger-side air bag module mounting bolts. See Fig 1. Remove passenger-side air bag module from instrument panel cross-beam.
To install, reverse removal procedure. Tighten passenger-side air bag module bolts to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ZONE 5 under DISABLING & ACTIVATING AIR BAG SYSTEM.

Fig 1: Identifying Passenger-side Air Bag Module

Courtesy of GENERAL MOTORS CORP.