Circuit Description
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
When ignition is turned on, Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. When SDM has completed power-up mode, SDM will establish communication with Passenger Presence System (PPS). PPS will respond by commanding both PASSENGER AIR BAG ON and OFF indicators, located in rear view mirror, on for 5 seconds. SDM will transmit a request message to PPS to receive PPS verification identification. PPS will transmit verification identification to SDM and SDM will compare identification received to data stored in memory. If data does not match, SDM will set DTC B0098 and turn AIR BAG warning light on. PPS will set DTC 065 and request SDM to disable passenger-side air bag module deployment loop.