Diagnostic Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- If SIR Diagnostic System Check has been performed, go to next step. If SIR Diagnostic System Check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK .
- Turn ignition off. If air bags have deployed, go to step 5. If air bags have not deployed, go to next step.
- Inspect vehicle and undercarriage for signs of impact. If impact has occurred, go to step 5. If no impact has occurred, go to next step.
- Replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM) under REMOVAL & INSTALLATION. Go to step 6.
- Replace components and perform inspections as required following an accident. See POST-COLLISION INSPECTION . Go to next step.
- Reconnect all SIR components. Go to SIR DIAGNOSTIC SYSTEM CHECK .