LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 451 (Engine Controls - Removal & Installation) >> Solenoids >> EVAP Canister Vent Valve >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support vehicle. EVAP canister vent valve is located on frame crossmember under vehicle. Disconnect EVAP canister vent pipe from EVAP canister vent valve. Disconnect EVAP canister vent valve harness connector. Detach EVAP canister vent valve from bracket. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals