LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 451 (Engine Controls - Removal & Installation) >> Emission Systems & Sub-Systems >> EVAP Canister >> Installation

EVAP Canister: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten EVAP canister mounting bolts to specification. See TORQUE SPECIFICATIONS . Lower vehicle.

Fig 1: Locating EVAP Canister (Mounted To Frame Rail)
G00156254Courtesy of GENERAL MOTORS CORP.


To install, reverse removal procedure. Tighten EVAP canister mounting bolts to specification. See TORQUE SPECIFICATIONS . Lower vehicle.

Fig 1: Locating EVAP Canister (Mounted To Crossmember)
G00156253Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals