Removal & Installation
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix, 2003 Chevrolet Monte Carlo, 2003 Chevrolet Impala, 2003 Buick Regal, and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Disconnect the EVAP canister vent valve harness connector.
- Disconnect the hose from the EVAP canister vent valve.
- Remove the EVAP canister vent valve bolt.
- Remove the EVAP canister vent valve from the vehicle.
- To install, reverse removal procedure.