EVAP Canister Purge Valve: Installation
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix, 2003 Chevrolet Monte Carlo, 2003 Chevrolet Impala, 2003 Buick Regal, and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
Position the EVAP canister purge solenoid on the intake manifold and install the retainer bolt. Tighten the EVAP canister purge solenoid retaining bolt to specification. See TORQUE SPECIFICATIONS . Connect the EVAP canister purge pipe and the vacuum supply hose. Connect the EVAP canister purge solenoid electrical connector.
Install the EVAP canister purge solenoid onto the EVAP canister purge solenoid mounting bracket. Connect the EVAP canister purge valve purge pipe and vacuum supply hose. Connect the EVAP canister purge valve harness connector. Install the fuel injector sight shield.