Circuit Description
WARNING: This page is about a different car, the 2003 GMC Savana and 2003 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
An ignition voltage is supplied to the High Pressure Lock-Off (HPL) solenoid through the HPL relay. The Powertrain Control Module (PCM) controls the HPL relay by grounding the control circuit via an internal switch called a driver. The primary function of the driver is to supply the ground for the controlled component. The PCM monitors the status of the driver. If the PCM detects an incorrect voltage for the commanded state of the driver, DTC P0005 sets.