LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Engine Controls - Removal & Installation - BIFUEL & CNG) >> Fuel Systems >> Fuel Hoses & Pipes >> Removal (Intermediate Pressure Regulator-To-Fuel Rail - Bank 2)

Removal (Intermediate Pressure Regulator-To-Fuel Rail - Bank 2)

WARNING: This page is about a different car, the 2003 GMC Sierra and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Combustible Gas Detector (J-45878) is required for this procedure. See Figure .
  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect the negative battery cable(s). Remove the Intermediate Pressure Regulator (IPR) fuel outlet line hold-down nut.
  2. Remove the fuel outlet line hold-down. Disconnect the IPR fuel outlet lines from the IPR. See Figure . Loosen the IPR fuel outlet line screw clamp at the fuel rail. Remove the IPR fuel outlet line hold-downs at the fuel rail. Remove the IPR fuel outlet line from the vehicle.