LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Engine Controls - Removal & Installation - BIFUEL & CNG) >> Fuel Systems >> Fill Line >> Removal (Pickup)

Removal (Pickup)

WARNING: This page is about a different car, the 2003 GMC Sierra and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Combustible Gas Detector (J-45878) is required for this procedure. See Figure .
  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  under FUEL SYSTEMS. Remove the tank cover. See FUEL TANK COVER  under FUEL SYSTEMS.
  2. Disconnect the fill line at the check valve fitting. Raise and support the vehicle. Disconnect the fill line at the fill valve fitting. Remove the fill line from the vehicle.