LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (Engine Controls - Removal & Installation) >> Sensors & Switches >> Intake Air Temperature Sensor >> Removal (4.2L)

Removal (4.2L)

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Disconnect Intake Air Temperature (IAT) sensor harness connector. IAT sensor is located in intake air duct. See Figure. Pull and twist outward on IAT sensor to dislodge sensor from intake air duct.

scientia non olet · About LEMON Manuals