Engine Mechanical
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the Engine Coolant Temperature (ECT) is not above 266°F (130°C). This condition causes the PCM to operate in Engine Coolant Over Temperature-Fuel Disabled Mode. While in Engine Coolant Over Temperature-Fuel Disabled Mode, the PCM will disable the fuel injectors to 4 cylinders at a time to keep engine temperatures from reaching damaging levels. The system perceives the Engine Coolant Over Temperature-Fuel Disabled Mode as a lack of power, miss, or rough idle. If the vehicle operates in Engine Coolant Over Temperature-Fuel Disabled Mode, see appropriate article in ENGINE COOLING.
- Inspect for excessive oil in the combustion chambers and leaking valve seals.
- Test for low cylinder compression.
- Inspect for incorrect basic engine parts, including the following:
- Camshaft
- Cylinder Heads
- Pistons, etc.