Removal & Installation (Passenger/Cargo Van)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Raise the vehicle. Remove the EVAP canister retainer. Disconnect the vent hose from the canister. Disconnect the chassis EVAP purge pipe from the EVAP canister. Disconnect the fuel tank EVAP pipe from the canister. Remove the EVAP canister from the fuel tank shield. To install, reverse removal procedure.