DTC P0220: Throttle Position Sensor 2 Circuit: Description
WARNING: This page is about a different car, the 2003 GMC Envoy XL and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
The Throttle Position (TP) sensor 2 is a potentiometer type sensor with 3 circuits:
- A 5-volt reference circuit.
- A low reference circuit.
- A signal circuit.
The TP sensor is used to determine the throttle plate angle for various engine management systems. The control module provides the TP sensor a 5-volt reference circuit and a low reference circuit. The TP sensor 1 signal voltage is low at closed throttle and increases as the throttle opens. When the control module detects that the TP sensor 2 signal or TP sensor 5-volt reference voltage is outside the predetermined range, this DTC sets.