LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Engine Mechanical - 4.8L, 5.3L, & 6.0L (On-Vehicle)) >> Repair Instructions >> Engine Sight Shield Replacement (4.8L, 5.3L, and 6.0L (LQ4)) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Top Engine Cover
    GM665886Courtesy of GENERAL MOTORS CORP.
  1. Loosen the intake manifold sight shield bolt.
  2. Remove the sight shield from the sight shield retainer.
    3. Fig 2: Intake Manifold Sight Shield & Bolts (4.8L, 5.3L, and 6.0L (LQ4))
    GM684149Courtesy of GENERAL MOTORS CORP.
  3. If removal of the sight shield retainer is required, disconnect the accelerator control cable clip from the retainer.
    4. Fig 3: Accelerator Control Cable At Sight Shield Retainer
    GM684150Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the cruise control cable clip from the retainer.
  5. Remove the sight shield retainer bolts and the retainer, if required.
scientia non olet · About LEMON Manuals