LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 429 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Pulley Removal >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

J 8614-01  Pinion Flange Holder

  1. Remove the crankshaft pulley retaining bolt using J 8614-01  to prevent crankshaft rotation when loosening the bolt.
  2. Remove the crankshaft pulley.
Fig 1: Removing Crankshaft Pulley
G01546463Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals