LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (Engine Mechanical - 8.1L V8) >> Removal & Installation >> Valve Rocker Arm & Push Rod >> Removal

Valve Rocker Arm & Push Rod: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Suburban, and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove valve rocker arm cover.
  2. Remove valve rocker arm nuts, valve rocker arm balls, and valve rocker arms.
  3. Remove valve push rods.
  4. Remove valve rocker arm studs and push rod guides.
  5. Clean and inspect valve rocker arms and push rods. See VALVES  under OVERHAUL.
scientia non olet · About LEMON Manuals