LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (Engine Mechanical - 8.1L V8) >> Overhaul >> Cylinder Head >> Valve Spring Inspection & Measurement

Valve Spring Inspection & Measurement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Suburban, and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect valve springs for broken coils or coil ends.
  2. Use Valve Spring Tester (J-9666) in order to measure the valve spring force. See VALVE SYSTEM  table.
  3. If valve spring tension is low, use a shim to increase tension.
  4. Recheck valve spring tension, a valve spring that does not meet specification must be replaced.