LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (Engine Mechanical - 8.1L V8) >> Overhaul >> Cylinder Head >> Valve Reconditioning Procedure

Valve Reconditioning Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Suburban, and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace valve if valve stem shows excessive wear or is warped.
  2. Reface pitted valves on a valve refacing machine in order to insure the correct relationship between the head and stem.
  3. Replace valve if the edge of the head is less than 0.031" (0.79 mm) thick after grinding.
scientia non olet · About LEMON Manuals