LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (Engine Mechanical - 8.1L V8) >> Overhaul >> Cylinder Head >> Valve Guide Reaming Procedure For Oversized Valve Stems

Valve Guide Reaming Procedure For Oversized Valve Stems

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Suburban, and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ream valve guide as necessary to achieve proper valve stem-to-guide clearance with the new, oversized valve stems.
  2. Always recondition the valve seat after reaming valve guide bores or installing new valves.
  3. Replace cylinder head if valve guide cannot be repaired or reamed to accept an oversize valve stem.
scientia non olet · About LEMON Manuals