LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 427 (Engine Mechanical - 4.8L, 5.3L, & 6.0L (Unit Repair)) >> Repair Instructions >> Valve Rocker Arm and Push Rod Removal

Valve Rocker Arm and Push Rod Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Place valve rocker arms, valve pushrods, and pivot support, in a rack so that they can be installed in the same location from which they were removed.
  1. Remove the valve rocker arm bolts.
  2. Remove the valve rocker arms.
    Fig 1: Valve Rocker Arms & Bolts
    G01674624Courtesy of GENERAL MOTORS CORP.
  3. Remove the valve rocker arm pivot support.
    Fig 2: Valve Rocker Arm Pivot Support
    G01674625Courtesy of GENERAL MOTORS CORP.
  4. Remove the pushrods.
    Fig 3: Pushrods
    G01674626Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals