LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 427 (Engine Mechanical - 4.8L, 5.3L, & 6.0L (Unit Repair)) >> Repair Instructions >> Coolant Air Bleed Pipe Removal

Coolant Air Bleed Pipe Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine coolant air bleed pipe bolts (1).
  2. Remove the pipe (2) and gaskets (3).
    Fig 1: Engine Coolant Air Bleed Pipe, Gasket & Bolts
    G01674609Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine coolant air bleed pipe cover bolts (1) and covers (2).
    Fig 2: Engine Coolant Air Bleed Pipe Cover & Bolts
    G01674610Courtesy of GENERAL MOTORS CORP.
  4. Remove the gaskets from the pipe and covers.
  5. Discard the gaskets.
    Fig 3: Engine Coolant Air Bleed Pipe Cover Gasket
    G01674611Courtesy of GENERAL MOTORS CORP.
  6. Remove the hose (1) from the pipe (2).
    Fig 4: Engine Coolant Air Bleed Pipe & Hose
    G01674612Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals