DTC P0336: Crankshaft Position Sensor Circuit: Description
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Chevrolet Monte Carlo, 2003 Chevrolet Impala, and 2003 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Crankshaft Position (CKP) sensor is connected directly to Ignition Control Module (ICM). CKP senor consists of the following circuits:
- 12-volt reference circuit.
- Low reference circuit.
- CKP sensor 1 signal circuit.
- CKP sensor 2 signal circuit.
CKP sensor shares power supply and low reference circuits with camshaft position (CMP) sensor. If the PCM detects no 18X reference pulses in one engine cycle. DTC P0336 sets.