LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 420 (Engine Controls - Theory & Operation - 3.8L) >> Computerized Engine Controls >> Input Devices >> A/C Compressor Clutch Relay

A/C Compressor Clutch Relay

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Chevrolet Monte Carlo, 2003 Chevrolet Impala, and 2003 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Ignition voltage is supplied directly to the A/C compressor clutch relay. The Powertrain Control Module (PCM) controls the relay by grounding the control circuit through an internal solid state device called a driver. The primary function of the driver is to supply the ground for the component being controlled. Each driver has a fault line which is monitored by the PCM. When the PCM is commanding a component ON, the voltage of the control circuit should be near zero volts. When the PCM is commanding the control circuit to a component OFF, the voltage potential of the circuit should be near battery voltage.