LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 419 (Engine Mechanical - 3.5L (On-Vehicle)) >> Repair Instructions >> Secondary Camshaft Drive Chain Tensioner Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right exhaust secondary camshaft timing sprocket. Refer to Secondary Camshaft Timing Sprocket Replacement - Right Exhaust .
  2. Remove the secondary drive chain tensioner retaining bolts.
  3. Remove the secondary drive tensioner.
    Fig 1: Removing Secondary Drive Chain Tensioner
    G01816808Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals