LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Engine Mechanical - 4.2L 6-Cylinder (On-Vehicle)) >> Repair Instructions >> Crankshaft Front Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Do not damage the engine front cover or the crankshaft.
  1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  2. Pry out the crankshaft front oil seal using a suitable tool. Use the provided slots for prying out the seal.
    3. Fig 1: Prying Out Crankshaft Front Oil Seal
    G01706301Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals