Test Description
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The numbers below refer to the step numbers in the diagnostic procedure.
- 2
This step determines if the IAT sensor reading is reading within a normal range. If the reading is outside of the specification, the IAT sensor may have a fault in the sensor or circuit. - 3
This step determines if the fault is present at the time of diagnosis. - 13
Reprogram the replacement ECM. Refer to the last Techline® information for ECM programming.